Difference between revisions of "Display Technology"
From esoterum.org
| Line 33: | Line 33: | ||
*(1.14) [http://ieeexplore.ieee.org/iel5/16/31792/01480144.pdf?tp=&isnumber=&arnumber=1480144 Hopper, Novotny, An Electrophoretic Display, Its Properties, Model, and Addressing, 1979] | *(1.14) [http://ieeexplore.ieee.org/iel5/16/31792/01480144.pdf?tp=&isnumber=&arnumber=1480144 Hopper, Novotny, An Electrophoretic Display, Its Properties, Model, and Addressing, 1979] | ||
| − | *(1.15) [ | + | *(1.15) [http://escher.elis.rug.ac.be/publ/Edocs/DOC/P103_126.pdf Neyts, Beunis, A 1-Dimensional Simulation Tool for Electophoretic Displays, 2003] |
=== Display Power === | === Display Power === | ||
Revision as of 00:17, 4 March 2007
Contents
Paper Search
"LCD power model" search on ACM
Display Technologies
Flexible Displays
Electrophroetic Displays
- Some current characterization for electrophoretic suspension fluid.
Display Power
- LCD greyscale single pixel power consumption formula
- (1.6) Iranli, Lee, Pedram, Backlight Dimming in Power-Aware Mobile Displays, 2006
- (1.4) Cheng, Chao, Minimization for LED-backlit TFT-LCDs, 2006
- Addresses independant scaling of three color LED backlights based on image histogram
- (1.7) Zhong, Jha, Graphical User Interface Energy Characterization for Handheld Computers, October 2003
- 3.1: Whenever there is a screen change, the processor generates new data for the changing screen pixels and stores them into the framebuffer. This implies a higher energy consumption with increased temportal changes in the screen. Meanwhile, to maintain a screen on the LCD, the LCDC must sequentially read screen data from the frame-buffer and refresh the LCD pixels even when there is no screen change.
- 3.1: The display itself consists of several parts: LCD power circuitry, a front light, and an LCD. The LCDs used in the systems we studied are color active thin film transistor (TFT) LCDs. In such LCDs, each pixel has three comonents: R, G and B, signifying red, green and blue, respectively. Liquid crystals for each component are independently oriented by two polarizers, which are connected to a storage capacitor. The capacitor is in turn charged and discharged through a TFT to accommodate screen changes. Moreover, the capacitor must be refreshed at a high rate to maintain an appropriate voltage across the polarizers so that the corresponding liquid crystals remain properly oriented.
