Difference between revisions of "Display Technology"
From esoterum.org
| Line 33: | Line 33: | ||
*(1.19) [http://ieeexplore.ieee.org/iel5/9370/29754/01356551.pdf Takao, Miyasaka, Kawai, Hara, Miyazaki, Kodaira, Tam*, Inoue, Shimoda, ''Flexible Semiconductor Devices: Fingerprint Sensor and Electrophoretic Display on Plastic'', 2004] | *(1.19) [http://ieeexplore.ieee.org/iel5/9370/29754/01356551.pdf Takao, Miyasaka, Kawai, Hara, Miyazaki, Kodaira, Tam*, Inoue, Shimoda, ''Flexible Semiconductor Devices: Fingerprint Sensor and Electrophoretic Display on Plastic'', 2004] | ||
::EPD driver information and pixel level model | ::EPD driver information and pixel level model | ||
| + | ::Section 3. To compensate for the leakage current, the storage capacitor must be very large; here, the capacitance is 34 pF. | ||
*(1.20) [http://ieeexplore.ieee.org.ezproxy1.lib.asu.edu/iel5/16/22079/01027833.pdf?tp=&arnumber=1027833&isnumber=22079 Inoue, Kawai, Kanbe, Saeki, Shimoda, ''High-Resolution Microencapsulated Electrophoretic Display (EPD) Driven by Poly-Si TFTs With Four-Level Grayscale'', IEEE Transactions, August 2002] | *(1.20) [http://ieeexplore.ieee.org.ezproxy1.lib.asu.edu/iel5/16/22079/01027833.pdf?tp=&arnumber=1027833&isnumber=22079 Inoue, Kawai, Kanbe, Saeki, Shimoda, ''High-Resolution Microencapsulated Electrophoretic Display (EPD) Driven by Poly-Si TFTs With Four-Level Grayscale'', IEEE Transactions, August 2002] | ||
::EPD driven to produce greyscale | ::EPD driven to produce greyscale | ||
Revision as of 22:17, 24 March 2007
Contents
Project Documents
Paper Search
"LCD power model" search on ACM
Display Technologies
General
- > Qualcomm report on competitive modern display technologies
- Display Technologies for Portable Communication Devices, 2002
Liquid Crystal Displays (LCD)
- Liquid Crystal Display (LCD)
- > LCD background
- > Thin Film Transistor (TFT LCD) Overview (plasma.com)
- TFT on Wikipedia
- Active Matrix LCD
Flexible Displays
Electrophroetic Displays (EPD)
- Electronic paper prototype
- Electrophoretic technology
- An electrophoretic ink for all-printed reflective electronic displays, 1998
- (1.12) Dalisa, Electrophoretic Display Technology, 1977
- Some current characterization for electrophoretic suspension fluid.
- (1.13) Katase, Method and circuit for driving electrophoretic display, electrophoretic display and electronic device using same, U.S. Patent 6961047, 2005
- (1.14) Hopper, Novotny, An Electrophoretic Display, Its Properties, Model, and Addressing, 1979
- (1.15) Neyts, Beunis, A 1-Dimensional Simulation Tool for Electophoretic Displays, 2003
- (1.17) Herz, Electrophoretic Display technology: The beginnings, the improvements, and a future in flexible electronics, May 19, 2006
- (1.19) Takao, Miyasaka, Kawai, Hara, Miyazaki, Kodaira, Tam*, Inoue, Shimoda, Flexible Semiconductor Devices: Fingerprint Sensor and Electrophoretic Display on Plastic, 2004
- EPD driver information and pixel level model
- Section 3. To compensate for the leakage current, the storage capacitor must be very large; here, the capacitance is 34 pF.
- EPD driven to produce greyscale
Electro-wetting displays
Organic Light Emitting Diode (OLED)
Display Power
- LCD greyscale single pixel power consumption formula
- (1.6) Iranli, Lee, Pedram, Backlight Dimming in Power-Aware Mobile Displays, 2006
- (1.4) Cheng, Chao, Minimization for LED-backlit TFT-LCDs, 2006
- Addresses independant scaling of three color LED backlights based on image histogram
- (1.8) Iranli, Pedram, DTM: Dynamic Tone Mapping for Backlight Scaling, June 2005
- (1.5) Gatti, Acquaviva, Benini, Ricco’, Low Power Control Techniques For TFT LCD Displays, 2002
- (1.3) Benini, Hodgson, Siegel, System-level Power Estimation And Optimization, August 1998
- (1.7) Zhong, Jha, Graphical User Interface Energy Characterization for Handheld Computers, October 2003
- 3.1: Whenever there is a screen change, the processor generates new data for the changing screen pixels and stores them into the framebuffer. This implies a higher energy consumption with increased temportal changes in the screen. Meanwhile, to maintain a screen on the LCD, the LCDC must sequentially read screen data from the frame-buffer and refresh the LCD pixels even when there is no screen change.
- 3.1: The display itself consists of several parts: LCD power circuitry, a front light, and an LCD. The LCDs used in the systems we studied are color active thin film transistor (TFT) LCDs. In such LCDs, each pixel has three comonents: R, G and B, signifying red, green and blue, respectively. Liquid crystals for each component are independently oriented by two polarizers, which are connected to a storage capacitor. The capacitor is in turn charged and discharged through a TFT to accommodate screen changes. Moreover, the capacitor must be refreshed at a high rate to maintain an appropriate voltage across the polarizers so that the corresponding liquid crystals remain properly oriented.
- (1.9) Kudurshian, Techniques in Decreasing Power Consumption for Handheld Displays, 2002
- (1.10) Choi, Shim, Chang, Low-Power Color TFT LCD Display for Hand-Held Embedded Systems, 2002
- (1.11) Marks, Power Consumption in Multiplexed Liquid-Crystal Displays, 1982
- (1.16) Ruckmongathan, Govind, Deepak, Reducing Power Consumption in Liquid-Crystal Displays, 2006
- (1.18) Aerts, Verlaak, Heremans, Design of an Organic Pixel Addressing Circuit for an Active-Matrix OLED Display, 2002
Other Resources
Last printed: 1.20
